Using Nokia Care Suiteto Flash/Refurbish or Update Nokia Mobile’s Firmware

Leave a Comment
Nokia Care Suite is an official Nokia mobile service software used in Nokia Care service centers to solve mobile software related issues.
Make sure to follow the instructions given in this post very carefully, I amnot responsible if anything goes wrong!!!
Charge up phone's battery to at least 3/4th of the full
Format memory card and remove it from phone during flashing
Now there are two scenarios
A) Flashing or Updating firmware of a Nokia phone (when the phone is in working condition)
With Nokia Care Suite you can update your mobile to the latest available firmware (if it is running an older one) just like you can do via Nokia Suite. NCS can also download the official phone software from Nokia servers and update the phone. The only difference between Nokia Care Suite and Nokia Suite software update is that Nokia Suite can also backup phone data (and restore it after update process) while Nokia Care Suite will perform a clean install (all phone data will be deleted). Follow the steps given below
1. If you already have phone's firmware files (downloaded via Navifirm etc) then copy them to C:\ProgramData\Nokia\Packages\Products\RM-XXX (where XXX is your phone's specific RM code for example it will be RM-807 for Nokia 808PureView). Create the folders if they do not exist according to the path. You may refer to this post to know how to use Navifirm to download Nokia firmware files.
2. However if you don't have the firmware files then Nokia Care Suitecan also download the latest firmware for your phone. To do it, launch NCS, at the main interface double click "Product Support Tool for Store".
3. At the opened window click " Tools / Firmware Download ". Enter your phone's product code in the dialogue box (this code is usually 7 digit long in the format 0XXXXXX , you can find yours by dialing *#0000# at standby screen/dial pad). Click Check online button wait for a while as NCS connects to Nokia firmware servers and shows the current software variant, version and size info. Now click Download button (do not tick/select the Optional content files option). NCS will start downloading the files wait for the process to complete (a fast internet connection is recommended)
4. After downloading completes, connect the phone with computer via data cable (in unlocked and ON condition). At "Product Support Tool for Store" window click Connection drop down button and select the USB phone connection. Wait for a while as NCS loads phone's info.
Now click the button Programming –Refurbish (at the bottom left)
Refurbish window will show phone's software info. Now Click " Start " button
Wait for the process to complete and NCS will notify you of the success…..done!!!
You can also use " Software Reset " option (instead of Refurbish) under Programming menu but this will reset phone's software rather than a clean re-install.
Nokia Care Suite Flashing
B) Flashing/updating a dead phone (due to firmware corruption) in switched Off condition
Like Phoenix "Dead phone USB flashing" option, Nokia Care Suite can also refurbish/flash a dead Nokia mobile. To do this, follow the steps given below –
1. First exactly follow the steps 1 to 3 described above
2. After downloading firmware files connect the dead/bricked phone (in switched off condition) with computer via data cable and launch Nokia Care Suite. Double click " Product Support Tool for Store "
3. At the opened window set connection to " No connection " (from drop down list at top left just below "File, View, Tools…. bar"). Now go to " File / Open Product ", find and select your phone's RM-xxx from the opened box and click Open
4. Now click " Programming – Recovery " (option button at the bottom left). At recovery window select the downloaded firmware and check/tick "Update automatically" and "USB Dead phone flashing" option boxes (may or may not be present according to NCS version) and click next. NCS will start flashing your device and it maytake several minutes so wait until the process completes…..if everything goes right you will get your phone back to life again
Troubleshooting
1. If Nokia Care Suite asks you to sign in then select " Care Suite External " from the drop down list and click "Sign In"
2. If you are flashing/updating the phone in ON condition then make sure to connect it with the computerin unlocked condition (without any security code enabled).
3. If you can't find the folder " C:\ProgramData\Nokia\Packages\Products " then it is probably hidden. To make it visible go to "Folder options" menu via My Computer and enable "Show hiddenfiles and folders" and disable "Hide protected operating system files"
4. If your phone is not detected by Nokia Care Suite (in switched ON condition) then either it is not supported by this version of NCS or its drivers are not installed in computer. To see the phone models supported by your installed NCS version go to " Help/Supported Products ". If your phone model is listed there and it is still not detected then try installing latest version of Nokia Suite in computer and see if this solves the issue.
5. If your phone is not supported by Nokia Care Suite then you can use Phoenix or JAF to flash it.
6. You must flash the phone only with the current (installed in the phone) or newer firmware version. DO NOT use an older (than the currently installed one) version software to flash the phone as this may damage it for good.

Download Nokia CAre Suite Here BEst Link by Salman
SalmanFact. Powered by Blogger.

Featured

BE Possesive

Featured

Explore Creativity

Featured Posts

Related Posts Plugin for WordPress, Blogger...